[GRLUG] can't seem to get my usb tv tuner to work

[Casey DuBois]

I had similar issues with multiple monitors on my Linus box.  Had to use 7. Still not perfect but it runs unlike with ubuntu.  

Regards,
Casey DuBois
616-808-6942

On Jun 18, 2012, at 4:48 PM, "Mike" <ironmike52 at hotmail.com> wrote:

> I still seem to have a problem with the usb tv tuner.  Have installed a couple of dvb files and other tv files and etc ... thinking of dumping opensuse and going with another distro.  one other problem I have with linux is that I have two monitors and I can setup them to work right or almost right ( would like main screen on my larger lcd ) but I can’t seem to save the setup and must do it every time I log in.
>  
> Looking for an os to do some video recording and editing for our church video ministry.  If I can get this setup done, I will not have to use Windoze.
>  
>  
> From: Mike Miller
> Sent: Wednesday, May 23, 2012 7:03 AM
> To: grlug at grlug.org
> Subject: Re: [GRLUG] can't seem to get my usb tv tuner to work
>  
> 
> 
> Note: No trees were killed in the sending of this message. However, a large number of electrons were terribly inconvenienced.
> 
> > From: tomewarren+grlug at gmail.com
> > Date: Thu, 17 May 2012 17:27:50 -0400
> > To: grlug at grlug.org
> > Subject: Re: [GRLUG] can't seem to get my usb tv tuner to work
> > 
> > On Thu, May 17, 2012 at 6:58 AM, Mike <ironmike52 at hotmail.com> wrote:
> > >
> > >
> > > -----Original Message----- From: megadave
> > > Sent: Wednesday, May 16, 2012 9:57 AM
> > > To: Mailing List for LUG in greater Grand Rapids, MI area.
> > > Subject: Re: [GRLUG] can't seem to get my usb tv tuner to work
> > >
> > >
> > > Have you review the info here, especially the bits at the bottom of
> > > the page (after the very loooooong lsusb output)
> > >
> > > http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-950
> > >
> > > I did go to that page.   Very informative but still don't work.  I am a
> > > Microsoft guy trying Linux out and sometimes I don't know the simplest
> > > commands. I got thru all directions but the   " run the extract_xc3028.pl
> > > script found in linux/Documentation/video4linux: ".  I believe I don't have
> > > that file on the computer yet.
> > 
> > 
> > You need to install v4l-tools for this to work.
>  
> according to YaST2 I have v4l-tools and v4l-tools-debuginfo installed .... ver 2.102-2.1.2
>  
> 
> > _______________________________________________
> > grlug mailing list
> > grlug at grlug.org
> > http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> _______________________________________________
> grlug mailing list
> grlug at grlug.org
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> _______________________________________________
> grlug mailing list
> grlug at grlug.org
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://shinobu.grlug.org/pipermail/grlug/attachments/20120618/b069f0e9/attachment-0001.html>