[GRLUG] dead computer

[Cprossu]

>>[quote] DQS training failed on previous boot.   Reverted to slower dram
speed.[/quote]


I've seen that message before with ram that was timed/clocked higher than
it would reliably perform stock, it being ADATA cheapie ram that makes me
wonder.

I'd still make sure your cmos battery is good though, but until you have
another issue, happy computing!


On Tue, Dec 17, 2013 at 9:29 AM, John-Thomas Richards <jtr at jrichards.org>wrote:

> On Tue, Dec 17, 2013 at 10:16:09AM -0500, Patrick Goupell wrote:
> >
> > On 12/16/2013 08:19 PM, Cprossu wrote:
> > >I see all the hard stuff has been discussed. Make sure your cmos
> > >battery has the correct charge/isn't shorted, I've had ECS boards
> > >refuse to post due to that before (it will be a CR2032 lithium
> > >button battery on your motherboard between the pcie and pci
> > >slots). If it still doesn't boot with a battery swap, try the
> > >clear cmos jumper. Like others here I'd check the few electrolytic
> > >caps on the motherboard (Actually scratch that, report back of the
> > >solid caps that are installed on that board are 'through-hole' or
> > >not, I wonder if these are the badly made 'lytics from a while ago
> > >that were made to 'look like' solid caps), then swap out the ram,
> > >then try another power supply. I'd try a video card too for the
> > >heck of it, even if it's an older PCI one. The good news is that
> > >if it is your motherboard, you can pick up something fairly cheap
> > >(like $55) off of newegg or something (I'd recommend like a Asus
> > >M6A78L-M Plus), and if it ends up being your ram, 4gb of kingston
> > >ddr3 1333 is currently going for around $30. Either way cheap fix.
> > >
> >
> > Was in the computer this morning.
> >
> > Unplugged everything and inspected the motherboard.  Did not see
> > anything that looked like bad / leaking capacitors (or anything
> > else).
> >
> > Plugged everything back together and hit the power button.
> >
> > It came on with the following bios message:
> >
> > DQS training failed on previous boot.   Reverted to slower dram speed.
> >
> > So I don't know what the problem was.  Will hope that it doesn't come
> back.
>
> A quick search on that error message suggests incorrectly overclocked
> RAM, bad RAM, or a bad CMOS battery.
> --
> john-thomas
> ------
> In a perfect union the man and woman are like a strung bow. Who is to
> say whether the string bends the bow, or the bow tightens the string?
> Cyril Connolly, critic and editor (1903-1974)
> _______________________________________________
> grlug mailing list
> grlug at grlug.org
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://shinobu.grlug.org/pipermail/grlug/attachments/20131217/980977c7/attachment-0001.html>