[GRLUG] install of Core 3 on a Libretto 110CT

[kyle victor]

no PXE native


On 4/27/06, Matthew Whitaker <matthew.whitaker at haworth.com> wrote:
> Can you PXE boot this device?
>
> I know it can be a pain to set up, but I am quite sure that fedora supports
> a network install from a pxe boot image.
>
>
> On Thu, 2006-04-27 at 15:44 -0400, kyle victor wrote:
> ok after doing some digging i can not boot this device from usb

only floppy
> or Hard drive

so i broke down and bought a PCMCIA floppy of ebay for this
> device today

as soon as i have it i will do a network install, should be
> all it needs

the bummer is i will not get the drive in time to win the
> bet

i know i will get Core 3 to run on this thing, but not by May 1

going
> to lose a bet to a winders admin



On 4/27/06, kyle victor
> <computerguy.kyle at gmail.com> wrote:
> the device does not have a usb, but
> the docking station does, i will
> look to see if i can boot usb, but i am
> not sure if the BIOS will let
> me, i will look
>
> but thanks for the
> manual ramdisk config idea, i will dig into it
>
>
>
> On 4/27/06, Rick
> Vargo <rick at vargo.org> wrote:
> > It is likely the ramdisk is causing the
> kernel panic. It is probably
> > trying to load something not present at
> boot. Try creating the ram disk
> > by hand on your setup machine(mkinitrd
> or mkinitramfs depending on
> > kernel, distro, etc) with only basic drivers
> (see man pages for
> > details). Does this machine have a USB port? If so,
> you may want to
> > make a thumb drive boot disk and then do a network
> install... It may be
> > easier.
> >
> > Rick
> >
> > On Thu, 2006-04-27 at
> 11:56 -0400, kyle victor wrote:
> > > ok closer
> > >
> > > i pulled the
> drive back out, and put it into the laptop i did the install from
> > >
> >
> > i was able to force the i586 kernel and the i386 glibc rpms
> > >
> > >
> then put the drive back into the libretto
> > >
> > > i get beyond the point
> it had been rebooting at, (the ram disk init)
> > >
> > > but now i get a
> panic
> > >
> > > i have tried to pass the ide=reverse as a boot option
> after doing some
> > > google work
> > >
> > > about 4 to 8 lines scroll off
> the top of the screen so i do not know
> > > what they say, but the lines i
> can read are following:
> > >
> > > ds: 007b es: 007b ss:0068
> > > Process
> init (pid: 1, threadinfo=C106F00 TASK-C1073730)
> > > Stack: c30459f8
> c3044a44 c3045900 000001a4 c3045a5c c1f82200 00000000 00000000
> > >
> c3043c62 c114ec00 c1f82200 c1ed1400 c307ccde c1eef940
> > > c1f82400
> 00000000
> > > c307c5a0 00000001 c106fe9c c1f83610 c1f83600 00000001
> > >
> 00000000 00000000
> > > Call Trace:
> > > [<c3043c62>]
> journal_flush+0x3ac/0x66f [jbd]
> > > [<c307ccde>]
> ext3_mark_recorvery_complete+0x21/0x59 [ext3]
> > >
> [<c307c5a0>] ext3_fill_super+0x874/0x968 [ext3]
> > > [<c016f7e4>]
> get_sb_bdev+0xe0/0x11c
> > > [<c01c93fb>] selinux_sb_copy_data+0x33/0x157
>
> > > [<c307d4b1>] ext_get_sb+0xe/0x11 [ext3]
> > > [<c307bd2c>]
> ext3_fill_super+0x0/0x968 [ext3]
> > > [<c016f9ad>]
> do_kern_mount+0x8a/0x13a
> > > [<c018b440>] do_new_mount+0x61/0x90
> > >
> [<c018bf99>] do_mount+0x16a/0x182
> > > [<c01491c9>]
> __alloc_pages+0xb3/0x295
> > > [<c01e0de6>]
> direct_strncpy_from_user+0x3e/0x5d
> > > [<c018c474>]
> sys_mount+0x121/0x1f9
> > > [<c030bf47>] syscall_call+0x7/0xb
> > >
> > >
> code: 83 78 01 00 00 00 00 00 85 f6 75 29 68 5c 04 c3 68 a4 01 00 00 68 00
>
> > > 59 04 c3 68 44 4a 04 c3 68 f8 59 04 c3 e8 4c 13 0e fd <0f> 0b a4 01
> >
> > 00 59 04 c3
> > > 83 c4 14 39 bb 90 01 00 00 75 68 81 7b
> > > <0>Kernel
> panic - not syncing: Attempting to kill init!
> > >
> > > beside ide=reverse
> i have tried
> > > boot options
> > > apm=off acpi=off ide=nodma nousb
> nopsmcia noapic nofb
> > >
> > > any ideas?
> > >
> _______________________________________________
> > > grlug
> mailing list
> > > grlug at grlug.org
> > >
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> >
> >
> >
> > _______________________________________________
>
> > grlug mailing list
> > grlug at grlug.org
> >
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
>
> >
>
>
> --
> Kyle Victor MCSA/MCSE/Linux +/RHCT
>
> visit Kyle's website
> at:
> http://computerguykyle.gotdns.com
>


--
Kyle Victor
> MCSA/MCSE/Linux +/RHCT

visit Kyle's website
> at:
http://computerguykyle.gotdns.com
_______________________________________________
grlug
> mailing
> list
grlug at grlug.org
http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug

>
> _______________________________________________
> grlug mailing list
> grlug at grlug.org
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
>
>


--
Kyle Victor MCSA/MCSE/Linux +/RHCT

visit Kyle's website at:
http://computerguykyle.gotdns.com