[GRLUG] install of Core 3 on a Libretto 110CT

kyle victor computerguy.kyle at gmail.com
Tue Apr 25 14:00:35 EDT 2006


yeap i looked it up

i586 is the original pentium like you said


On 4/25/06, Al Tobey <tobert at gmail.com> wrote:
> On 4/25/06, kyle victor <computerguy.kyle at gmail.com> wrote:
> > i have found a i386 version of glibc
> >
> > but kernel has a i686 or i586
> >
> > will i586 work?
>
> I believe so.   i586 = Original Pentium, i686 = Pentium Pro and up.
>
> >
> > i tried the boot options "acpi=off" and "noapic" and then tried "ide=nodma"
> >
> > even tried all three together, didn't do it, but thank you none the less
> >
> > if i586 will work i will try to force the kernel
> >
> >
> >
> >
> > On 4/25/06, Al Tobey <tobert at gmail.com> wrote:
> > > On 4/24/06, Godwin <geektoyz at gmail.com> wrote:
> > > > Plain text anyone?  Here ya' go...
> > > >
> > > > On 4/24/06, kyle victor <computerguy.kyle at gmail.com> wrote:
> > > >
> > > > hi guys,
> > > >
> > > > i was given this little Toshiba laptop thing a Libretto 110 CT, and i
> > > > want to get Core 3 on it (actually have a bet with a co-worker, he
> > > > says i cant) anyway i dont know if any of you guys have ever seen or
> > > > used one of these devices, yet its not a device question i have anyway
> > > > this device has no Floppy or CDROM so to do the install i pulled the
> > > > 2.5" hard drive and dropped it into a different laptop did a
> > > > auto-partition and installed very few modules pretty much very XFce,
> > > > firefox, and a couple edtitors
> > > >
> > > > i booted it once and edited inittab to runlevel 3 i put the drive back
> > > > in the device, and tried to boot it tries to load the kernel then
> > > > re-boots, and just loops i was wondering if any of you have seen an
> > > > install try to load the kernel and re-boot and/or if anyone has an
> > > > idea of what i should look at
> > >
> > > Try kernel options "acpi=off" and "noapic" first to see if those work.
> > >   Another one to try is "ide=nodma".    You should be able to add
> > > these by interrupting GRUB and hitting "e" on the kernel line then
> > > appending these options.   Heck, try all three at once.
> > >
> > > You may also have to install the "i386" kernel and glibc instead of
> > > the "i686" if it is not a Pentium Pro, II or higher.  That will cause
> > > instant reboots, too.   There may be a way to force Fedora to install
> > > the i386 stuff.   I'm pretty sure Debian has an easy way to do it.
> > >
> > > In fact, the wikipedia has an entry for Librettos.   Looks like you
> > > have an original Pentium.
> > > http://en.wikipedia.org/wiki/Toshiba_Libretto
> > >
> > > You'll have to replace your kernel and glibc with the i386 versions.
> > > These should be on the CD if you want to try:
> > > rpm -Uvh --force kernel-xxxxxx-i386.rpm glibc-xxxxxx-i386.rpm
> > >
> > > If you can get it to boot at all, try sending a copy of "lspci -v" out
> > > to this list.
> > >
> > > Lastly, google is your friend.
> > > http://home.hccnet.nl/pr.nienhuis/Lib110CT.html
> > >
> > > It appears you will have to modify /etc/X11/xorg.conf and change the
> > > video driver to use "vesa."   It's likely that running "Xorg
> > > -configure" will generate a suitable configuration for you if you can
> > > get into runlevel 3.   It'll write it to /root/xorg.conf.new (or
> > > something like that), which you can probably just copy into
> > > /etc/X11/xorg.conf.   Make sure to keep a backup of the one you have,
> > > though.
> > >
> > > Good luck,
> > > -Al Tobey
> > >
> > > > --
> > > > Kyle Victor MCSA/MCSE/Linux +/RHCT
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > Ubber::Geek
> > > > http://grlug.org/
> > > > _______________________________________________
> > > > grlug mailing list
> > > > grlug at grlug.org
> > > > http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> > > >
> > > _______________________________________________
> > > grlug mailing list
> > > grlug at grlug.org
> > > http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> > >
> >
> >
> > --
> > Kyle Victor MCSA/MCSE/Linux +/RHCT
> >
> > visit Kyle's website at:
> > http://computerguykyle.gotdns.com
> > _______________________________________________
> > grlug mailing list
> > grlug at grlug.org
> > http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
> >
> _______________________________________________
> grlug mailing list
> grlug at grlug.org
> http://shinobu.grlug.org/cgi-bin/mailman/listinfo/grlug
>


--
Kyle Victor MCSA/MCSE/Linux +/RHCT

visit Kyle's website at:
http://computerguykyle.gotdns.com


More information about the grlug mailing list